Civic/Accord - Clip Mouldings

[Windshield Guy]

What is the best way to replace the clip mouldings back on the Civic or Accord? On one occasion, they have broken so whats the best method to replace it? Any tips or advice would be appreciated. Thanks for your help.

[streekyd]

What Year?
There are about 10 differant package #'s for Mlds and 10 for the cowl in the Precission book.
Are you refering to the ones that go on the pinchweld wall or the ones that fit into the molding?

[Windshield Guy]

2001 Civic ... both for the pinchweld wall and the moulding. Thanks.

What Year?
There are about 10 differant package #'s for Mlds and 10 for the cowl in the Precission book.
Are you refering to the ones that go on the pinchweld wall or the ones that fit into the molding?

[streekyd]

Precission shows their part#
For the Civic
PCK F2183-01 for the Sedan
PCK F2218-01 for the Coupe
If these are the ones that have the adhesive tape on the clip to hold it to the pinchweld than you have to caefully remove the brocken clip and with a razor blade remove the tape with out scrathcing the paint, if you do put some pinchweld primer on the scratches. To put the new on on clean the surface, if there is any residue left from the old clip, apply you clip just above or below where the old one was.
each package contains 8 pcs.
Mouldings:
WFT F2183 - Top Filler
WFT F2218 - Top Filler

For the Accord
You will have to use a replacement moulding
WFS F2064 RC - 3 sided w/ rain gutter
WFS F2063 RC - 3 sided w/ rain gutter
WFS F2063 OEM - 3 sided w/ rain gutter

[Windshield Guy]

Thanks streetkyd.