porsche 2002 911 conv....

Discuss all aspects of windshield replacement, including techniques, billing, etc.
Post Reply
popeye

porsche 2002 911 conv....

Post by popeye »

need help,

i am a repair facility, i got this 2002 porsche conv. 911 and need to take the dash out to do some repairs but to this i need to take the windshield out and put the same one back in.. ive done windshield replacement before but never on a vehicle like this... does anyone have the right procedures on removing the windshield without damaging and reinstalling... thanks
streekyd
Junior Member
Posts: 88
Joined: February 11th, 2005, 10:21 am

Re: porsche 2002 911 conv....

Post by streekyd »

Post your question on this site:
http://pub24.bravenet.com/forum/2036554146/
Lee

Re: porsche 2002 911 conv....

Post by Lee »

Pull cowl, pull visors, pull the rest of the interior trim, disconect plugs at bottom of A pillers and tape to glass so as not to damage them. Mirror slides down if rain sensor equiped if not twist off. Remove push in outer vinyl moulding that fits into 3/4 plastic moulding on glass. We have wired these out succesfully with 2 people. If you are going to wire this out start wire at lower part of w/s 3-6 inches in from side. Cut wire at a 45% angle(this gives you a spear point on the wire and makes it easier to start). Protect dash with cardboard shield(cut the cardboard with a curve to fit in the dash area). Wire from the starting point up one side and half way across the top. Go back to starting point with wire and go the other way across the bottom and up the other side. Finish the top and remove glass. With 2 people this is the easiest way to save the glass. We have also removed these with a very thin and sharp Fein knife blade(for the top and as far down the sides you can get) and a extractor for the rest. Sorry this took so long. HTH
AH-A/G

Re: porsche 2002 911 conv....

Post by AH-A/G »

Take it to a glass shop that specializes in that kind of thing . I dont take my cars to the plumber if I need tires .
Lee

Re: porsche 2002 911 conv....

Post by Lee »

If YOU ever need a glass shop that can do this don't hesitate to call us.


A. Lee Festich
Alan Auto Glass
599 S Bonnywood Place
Burbank, Ca. USA 91502
phn 818-845-7300 fax 818-845-7355
http://alanautoglass.com/
AAAGLASSS@AOL.COM
autoglassrich

Re: porsche 2002 911 conv....

Post by autoglassrich »

I've also done successful R&R jobs with my Equalizer Express, Someone that knows the (touch) can get that out for you, but what Lee said IS the safest way! Rich
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests