Page 1 of 1

Indicators

Posted: August 13th, 2014, 1:01 am
by graham
Hi everyone

I did some headlights on a Suburu today. They were quite bad but the indicators were crystal clear. Why is this, as they are also polycarbonate/plastic not glass?

The headlights were just flat rectangles but the indicators were curved arounf the fender...so you'd think it would be the other way round!

Any clues??

Re: Indicators

Posted: August 13th, 2014, 12:52 pm
by Brent Deines
Your indicator bulbs produce very little heat but your headlights generate considerable heat. You will see this on most cars. You will also notice that cars with upgraded headlight bulbs (hotter) will discolor faster than lower powered bulbs.

Re: Indicators

Posted: August 13th, 2014, 3:55 pm
by graham
Thanks Brent. I guess thats pretty obvious now you mention it. Thanks.

Re: Indicators

Posted: August 14th, 2014, 2:45 am
by candyman
I normally include the park lights/indicator lights when I do a set of HLs. It makes the vehicle look better. I've seen others do the headlights only, even if its a wrap around lamp. Customers are pleased with the results.