Page 1 of 1
newbie polish question
Posted: September 4th, 2011, 9:17 pm
by redkev
I understand that some start with 320 grit others with 500 and move up the ladder. My question is does everybody use a polish after your last sanding step(3000) before sealing the HL? Or do you need those fine fine scratches for the Coat2Protect to hold. After reading soo much it starts to confuse ya. Just looking for the basics. Thanks.
Re: newbie polish question
Posted: September 5th, 2011, 5:33 am
by t4k
I stopped polishing long ago. The coating will fill all the scratches left by the 3000 making the polishing step a bit redundant.
Re: newbie polish question
Posted: September 5th, 2011, 5:59 am
by redkev
I have the metabo. What speed is everyone using? Thanks
Re: newbie polish question
Posted: September 5th, 2011, 8:21 am
by t4k
Wide open....#6, I think.
Re: newbie polish question
Posted: September 5th, 2011, 11:18 am
by mend master
Agree with t4k. No reason to polish.