New I-100

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
SGT
Senior Member
Posts: 949
Joined: August 11th, 2003, 7:39 am
Enter the middle number please (3): 5
Location: Pennsylvania
Contact:

Re: New I-100 Injector!!

Post by SGT »

How about some info on that even newer injector you are working on guys!!!!
Safe Glass Technologies

Image
2012 WRO Gold
2009 WRO Gold
2009 WSRPOTY
2008 WRO Silver
GlasWeldTech
Member
Posts: 434
Joined: August 9th, 2003, 3:11 pm
Enter the middle number please (3): 5
Location: West Monroe,La.
Contact:

Re: New I-100 Injector!!

Post by GlasWeldTech »

How much measurable vacuum does it pull?
Delta Kits
Moderator
Posts: 1194
Joined: August 9th, 2003, 4:00 am
Enter the middle number please (3): 5
Location: Eugene OR
Contact:

Re: New I-100 Injector!!

Post by Delta Kits »

GlasWeldTech wrote:How much measurable vacuum does it pull?
Spoken like a true GlasWeldTech! Doesn't matter if it can do a repair, as long as it can stick to your finger in the vacuum cycle! Just teasing you GWT! ;)

How about enough to remove all air from a break without reintroducing air when put back in the pressure cycle? That help? :)
Delta Kits, Inc.
GlasWeldTech
Member
Posts: 434
Joined: August 9th, 2003, 3:11 pm
Enter the middle number please (3): 5
Location: West Monroe,La.
Contact:

Re: New I-100 Injector!!

Post by GlasWeldTech »

Now if you would just send me one to evaluate and field test to get some on the job trials and tribulations of the latest and greatest!!!!!!!!!
Delta Kits
Moderator
Posts: 1194
Joined: August 9th, 2003, 4:00 am
Enter the middle number please (3): 5
Location: Eugene OR
Contact:

Re: New I-100 Injector!!

Post by Delta Kits »

GlasWeldTech wrote:Now if you would just send me one to evaluate and field test to get some on the job trials and tribulations of the latest and greatest!!!!!!!!!
Sure, no problem...Training is free, come on up to Eugene and i'll show you around! :) Plently of lakes and rivers to go fishing even!

:)
Delta Kits, Inc.
Bruno

Re: New I-100 Injector!!

Post by Bruno »

But seriously Jeff, in the picks I see no seals, so how do you create a vacumm in a non sealed enviroment? I have your injectors(old ones), and have yet too see any vac. Some explinations would greatly help us to understand the theory behind the injector.
Mike Allen

Re: New I-100 Injector!!

Post by Mike Allen »

Bruno wrote:But seriously Jeff, in the picks I see no seals, so how do you create a vacumm in a non sealed enviroment? I have your injectors(old ones), and have yet too see any vac. Some explinations would greatly help us to understand the theory behind the injector.

The seal is right where it's supposed to be, at the end.:eek: Have another look.

http://www.deltakits.com/dki-catalog/i-100.html
pbaker

Re: New I-100

Post by pbaker »

So if I were to order two of these tomorrow or the next day, what are the biggest differences that I would notice vs. your last model which I am very impressed with?
Bruno

Re: New I-100

Post by Bruno »

Mike

Thanks for the answer, but I was refering to piston seals. The end seal provides limited space for vac.

Jeff

Are you on vacation, usualy your answers are faster?
Mike Allen

Re: New I-100

Post by Mike Allen »

Pardon my ignorance but where is the piston seal?
Post Reply

Who is online

Users browsing this forum: No registered users and 35 guests