Page 2 of 2
Re: Dry sanding
Posted: August 10th, 2009, 3:27 pm
by sunshine wr
if you dry sand where a mask.
Re: Dry sanding
Posted: August 10th, 2009, 3:57 pm
by t4k
Kgobin wrote:I have successfully restored headlights dry and wet sanding. However, I wouldn’t recommend wet sanding because you are using an electric power tool.
Why would you not recommend wet sanding with power tools?
Re: Dry sanding
Posted: August 10th, 2009, 4:17 pm
by Kgobin
In my humble opinion, water and electricity don’t mix well.
Re: Dry sanding
Posted: August 10th, 2009, 5:38 pm
by t4k
Kgobin wrote:In my humble opinion, water and electricity don’t mix well.
Hmmm....I understand now!
Re: Dry sanding
Posted: August 10th, 2009, 5:42 pm
by t4k
I wet sand with power tools but I only mist the lens enough to keep the dust from becoming an issue. I also have GFI plugs on all of my cords and the locations I plug into have GFI built into their outdoor wiring facilities.
