Best Brand windshield

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
Post Reply
User avatar
Turbo
Junior Member
Posts: 2
Joined: February 29th, 2004, 7:19 am
Has thanked: 0
Been thanked: 1 time

Best Brand windshield

Post by Turbo » January 15th, 2018, 3:52 pm

Long time member, not many posts. The windshield cracked on my most cared for 1986 g-body Regal. I am a mechanically inclined person so I proceeded to remove the cracked windshield. Trying to find a new replacement of top quality is hard. The old one has tint across the top. What would be the best brand and how would I be able to get one?
These users thanked the author Turbo for the post:
jdn (February 2nd, 2018, 7:05 am)
Rating: 25%

kennycrane
Member
Posts: 142
Joined: November 23rd, 2009, 1:16 pm
Enter the middle number please (3): 3
Has thanked: 6 times
Been thanked: 28 times

Re: Best Brand windshield

Post by kennycrane » January 17th, 2018, 11:03 am

Probably hard to find one period. Car is 32 years old, many times when I have a customer with a car that old I am simply not able to obtain it through my distributers anyway. Many have to obtain one at a Salvage yard, However from my experience all glass from the most expensive to the cheapest, chips and cracks when a small rock from the roadway hits it. :o

Dempsterglass
Junior Member
Posts: 37
Joined: August 25th, 2014, 9:11 pm
Enter the middle number please (3): 3
Location: Flathead Valley,MT
Has thanked: 3 times
Been thanked: 10 times
Contact:

Re: Best Brand windshield

Post by Dempsterglass » February 1st, 2018, 10:43 pm

Pilkington would be manufacturer I would go with and they have the glass available still. However I would recommend having a qualified tech do the install. For that year I would definitely do a full strip to base paint. Prep, primer and use correct height set blocks so your moldings fit correctly to glass when installed. Also don’t fordgt new clips for moldings.
These users thanked the author Dempsterglass for the post (total 2):
Brent Deines (February 2nd, 2018, 8:37 am) • candyman (February 15th, 2018, 10:22 am)
Rating: 50%

User avatar
Brent Deines
Moderator
Posts: 2447
Joined: September 24th, 2003, 7:54 am
Enter the middle number please (3): 5
Location: Eugene, OR
Has thanked: 95 times
Been thanked: 195 times
Contact:

Re: Best Brand windshield

Post by Brent Deines » February 2nd, 2018, 8:37 am

Brent Deines
Delta Kits, Inc.

Glasseye
Member
Posts: 380
Joined: March 7th, 2006, 12:41 pm
Enter the middle number please (3): 5
Location: England, Staffordshire
Has thanked: 0
Been thanked: 19 times

Re: Best Brand windshield

Post by Glasseye » February 3rd, 2018, 5:14 am

Good advice from Dempster glass, regarding fitment. The only thing I would add is the new glass may have a different thickness to original so do a dry run for shape and trim gap to get correct height and ideally, while the pu is still in its workable phase, fit glass and trims and ease glass out to trims then fit the spacers in for a good fit.

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests