Which kit to start with?

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
Post Reply
screenman
Senior Member
Posts: 3192
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire
Has thanked: 73 times
Been thanked: 134 times

Re: Which kit to start with?

Post by screenman » December 2nd, 2016, 9:46 am

I use a Delta system and very little resin, about .2 of a gram on each repair giving me 75 repairs per bottle, other systems I have tried and tested use much the same or sometimes more. I am yet to find a system that uses less.
Top
Dave M
Senior Member
Posts: 648
Joined: August 9th, 2003, 6:13 am
Enter the middle number please (3): 5
Location: Westbrook, ME
Has thanked: 3 times
Been thanked: 14 times

Re: Which kit to start with?

Post by Dave M » December 2nd, 2016, 4:36 pm

I reported in a past post (maybe 8 yrs. ago) that I was getting 110 repairs from a 1/2 ounce bottle.
Top
Dave M
Senior Member
Posts: 648
Joined: August 9th, 2003, 6:13 am
Enter the middle number please (3): 5
Location: Westbrook, ME
Has thanked: 3 times
Been thanked: 14 times

Re: Which kit to start with?

Post by Dave M » December 2nd, 2016, 4:37 pm

I think we've gone above and beyond what this original post was about!
Top
sunshine wr
Senior Member
Posts: 626
Joined: August 13th, 2003, 5:53 am
Has thanked: 29 times
Been thanked: 20 times

Re: Which kit to start with?

Post by sunshine wr » December 2nd, 2016, 7:38 pm

There ain't nothin' that'll get these guys more riled up than a vacuum thread.
These users thanked the author sunshine wr for the post:
screenman (December 3rd, 2016, 12:41 am)
Rating: 25%
Top
screenman
Senior Member
Posts: 3192
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire
Has thanked: 73 times
Been thanked: 134 times

Re: Which kit to start with?

Post by screenman » December 3rd, 2016, 12:42 am

Just stating facts.
Top
sunshine wr
Senior Member
Posts: 626
Joined: August 13th, 2003, 5:53 am
Has thanked: 29 times
Been thanked: 20 times

Re: Which kit to start with?

Post by sunshine wr » December 3rd, 2016, 5:02 am

screenman wrote:Just stating facts.
Me too.
Top
ternaP
Junior Member
Posts: 10
Joined: November 29th, 2016, 7:13 am
Enter the middle number please (3): 3
Has thanked: 1 time
Been thanked: 0

Re: Which kit to start with?

Post by ternaP » December 3rd, 2016, 3:03 pm

I just found this site, didn't realize it was by delta. I use a machine for repairs and it out weighs a bridge system hands down.
Top
Dave M
Senior Member
Posts: 648
Joined: August 9th, 2003, 6:13 am
Enter the middle number please (3): 5
Location: Westbrook, ME
Has thanked: 3 times
Been thanked: 14 times

Re: Which kit to start with?

Post by Dave M » December 3rd, 2016, 4:07 pm

So which system are you using? Are we suppose to guess?!
These users thanked the author Dave M for the post:
KCBen (May 7th, 2018, 12:04 pm)
Rating: 25%
Top
Dave M
Senior Member
Posts: 648
Joined: August 9th, 2003, 6:13 am
Enter the middle number please (3): 5
Location: Westbrook, ME
Has thanked: 3 times
Been thanked: 14 times

Re: Which kit to start with?

Post by Dave M » December 3rd, 2016, 7:26 pm

I also used a machine that out weighed all injectors.....worked great but had to stop using it because it's 15 lb. weight was damaging my shoulder from carrying it around from one repair to another!
Top
sunshine wr
Senior Member
Posts: 626
Joined: August 13th, 2003, 5:53 am
Has thanked: 29 times
Been thanked: 20 times

Re: Which kit to start with?

Post by sunshine wr » December 4th, 2016, 9:58 am

Machines don't allow tech interaction with breaks. Some repairs require manipulation to fill properly, not just vacuum and pressure cycles!
Top
Post Reply

Return to “Windshield Repair”

Who is online

Users browsing this forum: Bing [Bot] and 10 guests