ring around the bullseye

Post your windshield repair tips, questions, advice! Note there is a sub-forum specifically for business development questions.
Cryatal_Image
Junior Member
Posts: 80
Joined: February 5th, 2012, 2:13 pm
Enter the middle number please (3): 3

ring around the bullseye

Post by Cryatal_Image »

This was a bullseye and is now gone but still has a ring within the 2 layers of glass. My wifes van and just got around to doing it. Its prob at least 6 months old i suppose. Anyone have any ideas what can be done ? It looks larger than it really is. Probably about the size of a pinky fingernail but still bad. Something like this need to be made into a star?
Attachments
downsized_0214121636.jpg
downsized_0214121636.jpg (67.66 KiB) Viewed 2662 times
bill lambeth
Senior Member
Posts: 565
Joined: September 17th, 2007, 4:29 pm

Re: ring around the bullseye

Post by bill lambeth »

Replace it if you can't live with it.
DryStar
Member
Posts: 344
Joined: October 22nd, 2010, 11:38 am
Enter the middle number please (3): 3

Re: ring around the bullseye

Post by DryStar »

Did you see any moisture prior to repair and dry it out? Looks to me something was in there and was trapped in outer ring. Not much you can do with it now. No need to replace, cause it won't get any worse or better. Not sure what you meant by making it into a star. Please explain further.
Cryatal_Image
Junior Member
Posts: 80
Joined: February 5th, 2012, 2:13 pm
Enter the middle number please (3): 3

Re: ring around the bullseye

Post by Cryatal_Image »

DryStar wrote:Did you see any moisture prior to repair and dry it out? Looks to me something was in there and was trapped in outer ring. Not much you can do with it now. No need to replace, cause it won't get any worse or better. Not sure what you meant by making it into a star. Please explain further.
Nope, everything was dry, was there before i started but nontheless, was hoping it could be hid but apparently not. But hey, my own fault not fixing ealier :oops:
Clarity Glass
Member
Posts: 169
Joined: December 9th, 2003, 1:00 pm
Enter the middle number please (3): 5
Location: Vancouver,WA.

Re: ring around the bullseye

Post by Clarity Glass »

is it a solar windshield? I have noticed Pontiac Rendezvous and a couple BMW with this occurence.
sunshine wr
Senior Member
Posts: 626
Joined: August 13th, 2003, 5:53 am

Re: ring around the bullseye

Post by sunshine wr »

If this is not a solarray ws .looks like you may be able to drill ,tap and fill -looks open all the way around.
Cryatal_Image
Junior Member
Posts: 80
Joined: February 5th, 2012, 2:13 pm
Enter the middle number please (3): 3

Re: ring around the bullseye

Post by Cryatal_Image »

99 pontiac montana . Its tinted towards the top of the windshield but this circle is right in the middle. not even close to the top. Like i said before though, it as a bullseye and all fingers were looped in so none were touching the ring. I'll drill it and see what happens. Just wasnt sure, never seen anything like it before so i thought i would ask.

Thanks
candyman
Senior Member
Posts: 742
Joined: June 16th, 2009, 11:28 pm
Enter the middle number please (3): 3
Location: NC
Contact:

Re: ring around the bullseye

Post by candyman »

If the halo looks hollow and you want to get rid of it, what do you have to loose. Drill and fill it. Whats the worst that could happen. You will gain some experience. Its your vehicle. Take your time. Also look at it with a magnifying glass. Have agood day.
Image
User avatar
Brent Deines
Moderator
Posts: 2452
Joined: September 24th, 2003, 7:54 am
Enter the middle number please (3): 5
Location: Eugene, OR
Contact:

Re: ring around the bullseye

Post by Brent Deines »

The Pontiac Montana is one of the vehicles that came factory equipped with a solar control windshield. In the sun they appear to have a purplish tint to them and bug will indicate they are a PPG Sungate product.

The Sungate windshield is notorious for leaving a whitish ring around the damaged area even before the repair is attempted. I have not seen it look any worse after the repair but the white ring often remains. Drilling is not going to help if this is the case because what you are seeing is not air, it's damage to the solar coating. "The Sungate windshield incorporates a multi-layer transparent metal/metal oxide coating on the inboard surface of the outer glass."

http://www.prescriptionwindshields.com/ ... ungate.htm

http://www.glasslinks.com/newsinfo/sungate2.htm

If it's not a Sungate windshield disregard this post for now but keep it in mind if you run across this vehicle again. Always check the bug and know what you are working on before you start a repair.
Brent Deines
Delta Kits, Inc.
Image
screenman
Senior Member
Posts: 3192
Joined: February 25th, 2004, 1:44 pm
Enter the middle number please (3): 5
Location: uk Lincolnshire

Re: ring around the bullseye

Post by screenman »

I agree with Brent, we have experienced a lot of that style of glass over here.

Just a question though, how were you so sure it was perfectly dry?
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests