Windshield Repair Forum

Three of the posters here are the same guy playing games.he was banned here twice under other names. Do a little research you will find the join fate of the biggest culprit is 3 days after the last ban. I'm not falling for the junk anymore myself.

Of course just pressure is often why you get a daisy as well. It has to go somewhere and the pv later is what will give. Too much pressure and no vac are the most common causes of the dreaded daisy. Not Really related to the original post but check this one went everywhere.

Not sure what the problem is you have the tape there are hundreds of how too on you tube. Get a piece of GLASS and practice. It's not hard

You could teach a monkey to do repair.

Hands on is the way just start doing practice repair after practice repair. Remember what worked and what didn't.

Not sure why you would drill that deep?Or if you are holding it firmly and burping it why you would be breaking any bits?

Well of course you would say something like that that your MO look to stir of course most of the folks in business no a drive across town to buy a part has value and why would you charge $75 for WR when you use less than $1 in materials? and of course anyone who has actually dealt with you average B...

I schedule them for a time I'm going to be in the area. Buy the correct one at the dealer all are different usually about 20 to 25 bucks I charge 145 same as the local GLASS guy gets in shop.

There are a few thing that you may come across. One is Many BMW s you will come across the upper seal will be breaking apart. This is pretty easy to replace. Use a awl or small screwdriver to remove the old. Pull out the little metal strip clean area with alcohol. Pull off tape on new molding push d...

The last resort is always put a small drop of resin and apply tab. Try to use just brought that it only covers the dull spot. Cure well pull tab do nothing else. It will be polished looking. If you had a small indent hopefully it's close to smooth. Again last resort.